Product Introduction
This machine is suitable for loading and unloading at warehouse platforms and postal hub facilities. It can be adjusted according to the different heights of freight truck compartments, either raised or lowered, to facilitate forklifts entering the compartments for convenient loading and unloading. There are anti – crushing aprons on both sides, making the work safer. Forklifts and other handling vehicles can directly enter the interior of the freight truck through the loading platform to carry out batch loading and unloading of goods. Only one person is required for operation, enabling rapid loading and unloading of goods. It enables enterprises to reduce a large amount of labor, improve work efficiency, and obtain greater economic benefits.
Product Advantages
Electric – hydraulic, simple operation, height adjustable freely, wide adjustment range, improved loading and unloading efficiency, and labor – saving.
Applicable Places
Places where loading and unloading are frequent, with various vehicle models, such as large enterprises, warehouses, stations, docks, warehousing and logistics bases, postal transportation, and logistics distribution, etc.
Product Knowledge
I. Instructions for Use of Loading Dock Leveler
Move the loading platform to the work site, close the cut – off valve of the manual pump, operate the hand pump, and raise the platform surface to an appropriate height (adjust according to the vehicle model).
Drive the freight truck slowly under the platform (judge by visual inspection that the tongue plate reinforcement rib at the back does not interfere).
Open the cut – off valve of the manual pump to make the platform surface and the truck body connect freely. Do not let the moving wheels bear the load.
Lower the tailboard, lock the platform to the vehicle body with a locking chain, and then loading and unloading operations can be carried out.
After work, release the chain, operate the manual pump to separate the platform surface from the vehicle body, and drive the freight truck away.
Raise the tailboard and move the loading platform away.
II. Precautions for Loading Dock Leveler
Lock the chains before loading and unloading goods. Loading and unloading operations are not allowed without locking.
Overloading is strictly prohibited.
During forklift loading and unloading, try to avoid unnecessary eccentric loading as much as possible to prevent damage to the platform surface and body and create danger.
During the working process, the cut – off valve of the manual pump must be opened to keep the tires in an unloaded state.
III. Daily Maintenance of Loading Dock Leveler
Check the working condition of the pin shaft monthly. If the fixing screw of the pin shaft is found loose, tighten it immediately to prevent the pin shaft from falling off and causing accidents.
Add lubricating grease to the rotating parts about once every two months when the equipment is used, depending on the situation.
