Nowadays, as the quality of life improves, people’s requirements for items are no longer just practicality, but also the pursuit of quality. Therefore, the mobile loading ramp from Lhbrloading.com has emerged. This product not only meets people’s needs, but is also aesthetically pleasing. Below is an introduction to the mobile loading ramp.
Overview of the Mobile Loading Ramp
This product has a reasonable structure, stable performance, and high working efficiency. Its greatest feature is its mobility. It is mainly suitable for the loading and unloading of goods on general container trucks and ordinary cargo vehicles. It is equipped with a highly efficient and integrated hydraulic lifting system, and has the advantages of easy maintenance, simple operation, low noise, and no pollution. It is one of the more ideal warehouse logistics loading and unloading equipment.
Features of the Loading and Unloading Platform
Designed through precise mechanical calculations, it features light weight, good overall rigidity, and large load-bearing capacity. The frame is welded from high-strength steel, square tube, and special channel steel, among other quality steels. The rear of the loading and unloading platform frame is equipped with adjustable screw rods to support the ground, which serves to fix the whole structure during loading and unloading operations. There are buffer rubber pads under the bottom frame of the loading platform, which play a buffering role when the platform descends to the ground to reduce impact. There are two front casters on the front crossbeam of the load-bearing bottom beam frame and two universal wheels on the rear crossbeam for easy movement of the whole vehicle. The hydraulic system and electrical control system are installed on the side of the equipment, which is convenient for maintenance and to prevent the vehicle from colliding with the electric control box when reversing while loading goods. It uses AC 380V or 220V voltage as the power source, fully reflecting a more reasonable and practical structural design.
Operating Instructions for the Mobile Loading Ramp
Before using the mobile loading ramp, it must be completely pushed to a flat ground where the loading vehicle can be parked conveniently, and the power supply must be connected to a socket. Plug in the plug and turn on the power protection switch of the machine. Press the lifting control button. When you hear the sound of the motor rotating in the hydraulic station but the lifting platform does not rise, it may be that the motor is reversing. Please switch the power conversion switch to the other direction so that the motor can rotate normally.
Since there is a height difference on the vehicle body where the goods are loaded, this machine has set up a lubricating adjustment plate for the platform tongue board. Users can adjust the height according to the height of the loading vehicle by themselves.
Before loading and unloading goods, the adjusting screw rods at the back of this equipment must be adjusted so that the universal wheels at the back are lifted off the ground before use.
During loading and unloading, after the goods are pushed onto the platform, the protective chain at the front of the platform should be hung up to prevent the goods from slipping.
It is strictly forbidden to carry people and goods on the mobile loading ramp. After the goods are loaded onto the platform, hang up the protective chain, and the staff should stand on the ground to control the lifting operation of the platform.
Precautions for Safe Operation of the Mobile Loading Ramp
Before use, please read the instruction manual carefully, and it must be operated by designated personnel. It is not allowed for people without professional knowledge to operate it casually.
The working pressure of the hydraulic system of the loading platform has been calibrated before leaving the factory, and it is absolutely not allowed to be adjusted casually, so as not to cause accidents or damage to parts. If users adjust it by themselves and cause accidents or economic losses, they will bear the consequences themselves.
The loading and unloading platform must be parked on a level ground when in use, and it is absolutely not allowed to be parked on uneven ground or sloping ground for loading and unloading operations.
During loading and unloading, it is not allowed for workers to mix with goods. Workers must stand on the ground to operate the lifting button to control the lifting of the platform, otherwise accidents are likely to occur.
Since the loading and unloading platform uses grid AC voltage, non-electrical professionals must not open the electric control box casually, so as not to have an electric shock accident.
The loading and unloading platform should be used in a place with a canopy cover during normal parking and during loading and unloading. If it is temporarily necessary to load and unload goods in the open air and it rains, work should be stopped, and the electric control box should be covered with adhesive tape to prevent rainwater from wetting the electrical appliances and causing short-circuit electric shock hazards.
The power cord of the loading and unloading platform cannot be casually dragged on the ground, so as not to be stepped on by pedestrians and crushed by vehicles. The power cord should be overhead and have a good ground wire connection. The power supply used should be equipped with a leakage protection switch device before use. In case of electrical failure during use and maintenance is required, the power must be cut off before maintenance work can be carried out.
Maintenance and Upkeep of the Mobile Loading Ramp
The mobile loading ramp is a load-bearing lifting equipment. Lubricating oil should be added to each moving part of the equipment before or after each work shift to ensure that there is sufficient lubricating oil on each moving part, so as not to cause wear due to lack of oil.
The hydraulic system of the loading and unloading platform adopts a high-integration, high-efficiency hydraulic station, which is reliable in quality, durable, and easy to maintain. If it is found during use that the platform cannot be lifted to the proper height and the noise of the hydraulic station is very loud, it may be that the oil tank is short of oil, and the oil volume should be supplemented at the mouth of the oil tank.
After a certain period of use, the hydraulic oil in the hydraulic system will deteriorate due to high temperature and high pressure operation for a long time, and the high-speed operation of the high-pressure oil pump will wear out. The metal powder attached to the hydraulic oil will cause circulating wear in the hydraulic system. Please completely drain the old hydraulic oil and replace it with new hydraulic oil within half a year of normal use.
If it is necessary to overhaul the hydraulic system and disassemble any part of the system, the lifting platform must be lowered to the lowest position, and the oil circuit pipeline system must be completely depressurized before overhaul.
During the overhaul process, if the staff need to enter the bottom of the loading and unloading platform for work, the platform chassis must be hoisted firmly or supported firmly before overhaul can be carried out.
The above is the complete introduction to the mobile loading ramp from Lhbrloading.com. The emergence of this product has made our lives better and is a very practical design. I hope it will be helpful to everyone.
